Wednesday, 23 November 2011 13:13

Are you keeping warm and does your glass make penguins smile? Tip #4

  • E-mail
99 out of 100 penguins prefer Planibel A glass 99 out of 100 penguins prefer Planibel A glass

With winter approaching fast and heating bills edging into the stratosphere, presumably along with your blood pressure it is worth having a quick check to make sure you are doing all you can to keep your home warm and cosy.


Do all your curtains fit? Tuck them behind the radiator where you can. Are there any draughts from the doors? Get a door snake, or better still, make one (click here). Are any of your windows misted over on the inside? Is there any water in between the panes? If so, they are not 'working' to keep your house warm and need to be replaced.


Don't worry, this does not cost quite as much as you might think. If you already have PVC windows, you can probably just get away with changing the sealed unit, rather than the whole window. New window, about £200, new sealed unit, about £20. Bit of a difference, isn't there?


We can do this for you, or you can save on the fitting charge and do it yourself (we sell the kit you'll need). To do this with no further ado, please get in touch with us – click on our website link here - Regent Windows. For more waffle about glass, keep reading......


Now, this probably won't come as too much of a shock, but glass isn't very good at keeping the heat in; sorry. Anyone who has stood inside a greenhouse in high summer will notice it gets quite warm inside. And if that same anyone goes into the greenhouse in the evening they will probably remark on how cool it has become. This is because glass is naturally highly thermally emissive, compared to, say, a feather-filled duvet. Unfortunately, you can't hang duvets in the windows as they don't let an awful lot of light in, which, unless you are a student or in the middle of an armed siege is not ideal.


So we need our windows to up their game a bit and help keep the house warm, as well as well-lit. We can't use greenhouse glass (too thin @ 3mm), and clear 'float' glass @4mm is not much better. So we use double glazed units with an outer and inner pane of 4mm glass, separated by a 'spacer bar', set into PVC window frames. Much better. However, since double-glazing first started, things have moved along an awful lot. Glass with different types of coatings are now available; some to keep more heat in (low-emissivity, aka low-e glass), some to cut down bright light levels (solar control, often used in conservatory roofs); some that stop dirt building up (self-cleaning glass).


The government, realising that the UK is lagging behind the rest of (Northern) Europe in reducing its levels of carbon emissions has done proper British thing of blaming someone else. Specifically, you and me. That's right, its your fault and my fault that the penguins haven't got enough space to stand because the polar ice shelves are melting. So they are now telling us to be more responsible and keep more of our heating inside (the government, not the penguins). And now all windows have energy ratings, which indicates how efficient they are at keeping the warm in.


Still with me? Well done.


We're all used to seeing 'A' rated items in the kitchen (fridges, freezers, ovens, etc.). Well, they're doing this to windows too. There is a difference, however; while we assume that anything less than an 'A' rating is no good, this is not strictly true with modern windows. For example, if you have single glazed windows, or windows with old (possibly wood) frames, or even if you have older types of double-glazed windows; you will be losing a lot of heat due to how old they are. So if you replaced them even with modern 'C' rated windows, you would notice an immediate, dramatic and significant improvement in both increased warmth and reduced noise levels. In the same way that a new car in 2011 will be better in almost every way than a new car bought in 1981, so to will a window bought in 2011 be more efficient and better than a window that was the bee's-knees in 1981. Progress, innit?


Anyway, what on earth has this got to do with the misted up window in the spare room? Well, all the sealed units we make at Regent use a glass called Planibel A. Plan A, as we call it, is a modern 'low-E glass', and has a hard, thermally efficient coating which reflects heat back into your house. This keeps the government and the penguins happy, and you nice and toasty.


So if you want to know more, visit our website or give us a call. You can even pop in and have a nose about if you want (don't hang around for too long or you'll end up getting roped into doing the hoovering or something). All glass sealed units are made on-site in our Cheltenham factory by local people. We've been doing what we do since 1994 and watched a lot of other firms (good as well as bad) fall by the wayside. We don't do 'foot in the door' type sales, we have neither the time nor the inclination. But if you want an excellent product for a very reasonable price, then come to us.


Regent Windows – Penguin-friendly glazing.

 

Previous blog

 

Next blog


Published in Blog - helpful and jargon-free (possibly funny too)
Social sharing
  • Add to Google Buzz
  • Add to Facebook
  • Add to Delicious
  • Digg this
  • Add to Reddit
  • Add to StumbleUpon
  • Add to MySpace
  • Add to Technorati
More in this category: « Aluminium and its role in unrequited love Guide to buying a conservatory - Part One »
back to top

Contact Details

Regent Windows
Units 1/2 Malmesbury Road,
Kingsditch Trading Estate,
Cheltenham, GL51 9PL
Tel: 01242 254 222
Fax: 01242 257 100
info@regentwindows.co.uk

Get In Touch

Follow Us

  • Facebook: pages/Regent-Windows/137120082982529?sk=wall
  • Linked In: company/1602975?trk=NUS_CMPY_FOL-co
  • Twitter: #!/regentwindows
  • External Link: www.regentwindows.co.uk/news-and-pr?format=feed

About Us

​Regent Windows is a family run ​business with a manufacturing facility based in the Cotswolds. For the last 24 years Regent have been manufacturing all types of windows & doors including composite front doors, bifolding and sliding doors In both aluminium and PVCu. We also have our own sealed unit facility and own installation teams if required. All our staff members are P.A.Y.E we do not have any subcontractors.

Our customers range from small local builders to the supply and installation for some of the UK's largest national constructions companies and housing associations.

  


Learn more